Power Management Solution

INTELIMAINS NT GC

Mains Controller

  • For multiple up to 31 gen-sets operating in parallel to mains (or isolated parallel)

  • To be used indenpendently or in conjunction with detachable colour displays InteliVision 5InteliVision 8,  InteliVision 12Touch, or InteliVision 18Touch

  • Import/export power control of the gen-set group; many different power control modes available

  • Reverse synchronization of the loaded gen-set group to mains

  • Coupling of several synchronized mains to a common bus

  • Allows to build complex applications with more mains incomers, bus-tie breakers etc.

INTELIGEN NT

Generator Controller

 

General information

  • Separate generator controller for parallel operation

  • Buil-in synchronizer, Load and VAR sharer, Power management

  • Configurable Inputs and Outputs

  • Modem, GSM, ISDN, Ethernet interface

  • Integrated PLC: AND, OR, RS, Comparators, Delays 

  • Integrated electric protections:
        -  3-phase over-under voltage
        -  3-phase over-under frequency
        -  IDMT, overcurrent and short current
        -  Overload and reverse-power
        -  kW-, kVA-, Running-hours, Num.starts

MAINSCOMPACT NT

Mains Controller

 

  • Mains controller for multiple systems equipped with InteliCompact NT MINT and InteliGen 200* gen-set controllers

  • Mains monitoring and protection

  • Mains circuit breaker control

  • Optional Master Generator circuit breaker control

  • AMF function (automatic start of the genset group after mains is failed)

  • True voltage and current RMS measurement

  • 3 phase mains voltage and current measurement

  • 3 phase busbar voltage measurement

  • 3 phase mains import measurement

  • RS232, RS485, USB, Modbus, GSM/Analog Modem, Internet communication**

  • GPRS communication

  • AirGate and WebSupervisor support

  • Event and performance log

  • 2 languages (user changeable)

INTELIGEN NT MARINE

Generator Controller

 

General information

  • Separate generator controller for parallel operation

  • Buil-in synchronizer, Load and VAR sharer, Power management

  • Configurable Inputs and Outputs

  • Modem, GSM, ISDN, Ethernet interface

  • Integrated PLC: AND, OR, RS, Comparators, Delays 

  • Integrated electric protections:
        -  3-phase over-under voltage
        -  3-phase over-under frequency
        -  IDMT, overcurrent and short current
        -  Overload and reverse-power
        -  kW-, kVA-, Running-hours, Num.starts

INTELICOMPACT NT

Generator Controller

 

  • Compact genset controller for gensets operating in multiple island and/or parallel to mains mode (together with MainsCompact NT)

  • Advanced Power Management for up to 32 gensets allowing

    • Load demand Start/Stop function

    • Load demand Swapping of different size gensets

    • Running Hours equalization

  • Active Load and VAr sharing

  • Full gen-set monitoring and protection

  • Possibility to connect up to 8 gauges to display engine values

  • True voltage and current RMS measurement

  • Outstanding EFI engine support (CAN/J1939, RS232/Modbus) with diagnostic messages in plain text

  • 3 phase generator voltage and current measurement

  • 3 phase busbar voltage measurement

  • 3 phase power measurement

  • 3 analog inputs

  • RS232, RS485, USB, Modbus, GSM/Analog Modem, Internet communication*

  • GPRS communication and IC-NT RD (remote display) software

  • AirGate and WebSupervisor support

  • Support of active SMS Events or Commands

  • Event and performance log

  • 2 languages (user changeable)

INTELIGEN 200

Generator Controller

  • Easy switching between parallel to mains or multiple genset applications

    • Multiple gensets in parallel to mains available together with InteliMains 210 controller

  • Two types of synchronisations: Phase Match or Slip Synchro

  • Two types of Load/VAr Sharing: Isochronous (CAN) or Droop, including Emergency Droop

  • Direct communication with EFI engines including Tier 4 Final support

  • Total remote monitoring and control

    • InteliConfig for configuration, single genset or mutli genset/site monitoring

    • WinScope for precise tuning of PID regulators exactly according to gen-set type and application needs

    • WebSupervisor for cloud based monitoring and control of your whole gen-set fleet

  • Wide range of communication and connection capabilities including:

    • USB, CAN and RS485 on board

    • USB master for configuration or firmware upload or download

    • RS232 and additional RS485 via plug-in module

    • internet access using Ethernet, GPRS/3G/4G via plug-in modules

    • configurable Modbus RTU or TCP and support of SNMP protocols v2

  • Internal PLC support with PLC editor and monitor included in InteliConfig

  • Active SMS and emails in different languages

  • Geofencing and tracking via WebSupervisor

  • 2 x 10 A binary outputs for cranking and fuel solenoid, powered by separated E-Stop input

  • Option for additional inputs/outputs

  • Flexible event based history with up to 350 events

  • Load shedding, dummy load capability

  • Comprehensive gen-set protections

  • Multipurpose flexible timers

  • UL listed

INTELIGEN 500

Generator Controller

  • 5" TFT with 800x480 px resolution

    • All important information available on well arranged measuring screens

    • Easy parameters setting

    • On-screen trends

  • Easy switching between parallel to mains or multiple genset applications

    • Multiple gensets in parallel to mains available together with InteliMains 210 controller

  • Two types of synchronisations: Phase Match or Slip Synchro

  • Two types of Load/VAr Sharing: Isochronous (CAN) or Droop, including Emergency Droop

  • Direct communication with EFI engines including Tier 4 Final support

  • Total remote monitoring and control

    • InteliConfig for configuration, single genset and multi genset/site monitoring

    • WinScope for precise tuning of PID regulators exactly according to gen-set type and application needs

    • WebSupervisor for cloud based monitoring and control of your whole gen-set fleet

  • Wide range of communication and connection capabilities including:

    • USB, CAN, RS485 and Ethernet on board

    • USB master for configuration or firmware upload or download

    • RS232 and additional RS485 via plug-in module

    • Internet access by using of inbuilt Ethernet or GPRS/3G/4G via plug-in modules

    • Configurable Modbus RTU or TCP and support of SNMP v2

  • Internal PLC support with PLC editor and monitor included in InteliConfig

  • Active SMS and emails in different languages

  • Geofencing and tracking via WebSupervisor

  • 2 x 10 A binary outputs for cranking and fuel solenoid, powered by separated E-Stop input

  • 4x switchable analog inputs (R/U/I)

  • Option for additional inputs/outputs

  • Flexible event based history with up to 500 events

  • Load shedding, dummy load capability

  • Comprehensive gen-set protections

  • Multipurpose flexible timers

  • UL listed

INTELIGEN NTC BaseBox

Generator Controller

  • Gen-set controller for both single and multiple gensets operating in standby or paralleling modes. 

  • To be used indenpendently or in conjunction with detachable / external colour displays InteliVision 5InteliVision 8,  InteliVision 12Touch, or InteliVision 18Touch

  • Support of engines with ECU (Electronic Control Unit)

  • Complete integrated gen-set solution and signal sharing via CAN bus – minimum external components needed

  • Many communication options - Ethernet connection (RJ45), USB 2.0 slave interface, 1× RS232 / 2× RS485 interface with Modbus protocol support; Analog / GSM / ISDN / CDMA modem communication support; SMS messages; ECU Modbus interface; isolated secondary RS485

  • AirGate support – easy remote supervising and servicing

  • Automatic synchronizing and power control (via speed governor or ECU)

  • AMF function, Baseload, Import / Export, Peak shaving, Voltage and PF control (AVR)

  • Generator measurement: U, I, Hz, kW, kVAr, kVA, PF, kWh, kVAhr

  • Mains measurement: U, I, Hz, kW, kVAr, PF

  • Selectable measurement ranges for AC voltages and currents – 120 / 277 V, 0–1 / 0–5 A

  • True RMS (TRMS) is used with Voltage, Current and Power measurement

  • Inputs and outputs configurable for various customer needs

  • Bipolar binary outputs - possibility to use BO as High or Low side switch

  • Controller redundancy

  • Event-based history (up to 1000 records) with customer-selectable list of stored values; RTC; statistic values

  • Integrated PLC programmable functions

  • Integrated fixed and configurable protections

  • DIN-Rail mount

  • Customized firmware solution 

  • With Solution of Application support - manage up to 992 Gen-sets in Extended Multiple Gen-set Application (Bank Controller)

INTELIGEN NT BaseBox

Generator Controller

  • Gen-set controller for both single and multiple gensets operating in standby or paralleling modes.  Overview of ComAp marine approved products available here

  • To be used indenpendently or in conjunction with detachable / external colour displays InteliVision 5, InteliVision 8,  InteliVision 12Touch, or InteliVision 18Touch

  • Support of engines with ECU (Electronic Control Unit)

  • Complete integrated gen-set solution and signal sharing via CAN bus – minimum external components needed

  • Many communication options – easy remote supervising and servicing

  • Gen-set performance log for easy problem tracing

  • Automatic synchronizing and power control (via speed governor or ECU)

  • AMF function, Baseload, Import / Export, Peak shaving, Voltage and PF control (AVR)

  • Generator measurement: U, I, Hz, kW, kVAr, kVA, PF, kWh, kVAhr

  • Mains measurement: U, I, Hz, kW, kVAr, PF

  • True RMS (TRMS) is used with Voltage, Current and Power measurement

  • Inputs and outputs configurable for various customer needs

  • Bipolar binary outputs - possibility to use BO as High or Low side switch

  • RS232 interface with Modbus support; Analog / GSM / ISDN / CDMA modem support; SMS messages; ECU Modbus interface

  • Controller redundancy

  • Event-based history (up to 1000 records) with customer-selectable list of stored values; RTC; statistic values

  • Integrated PLC programmable functions

  • Integrated fixed and configurable protections

  • DIN-Rail mount

  • Customized firmware solution

  • With Solution of Application support - manage up to 992 Gen-sets in Extended Multiple Gen-set Application (Bank Controller)

INTELIGEN NT BaseBox 400Hz

Generator Controller

  • Comprehensive gen-set controller for land aircraft operating at 400 Hz frequency (GPU-Ground Power Units)

  • Island operation, based on standard MINT application

  • Synchronizing and power management functions

  • To be used in conjunction with detachable / external colour displays InteliVision 5, InteliVision 8, or InteliVision 18Touch

  • Support of engines with ECU (Electronic Control Unit)

  • Many communication options – easy remote supervising and servicing

  • Gen-set performance log for easy problem tracing

  • Generator measurement: U, I, Hz, kW, kVAr, kVA, PF, kWh, kVAhr

  • True RMS (TRMS) is used with Voltage, Current and Power measurement

  • Inputs and outputs configurable for various customer needs

  • RS232 / RS485 interface with Modbus support; Analog / GSM / ISDN / CDMA modem support; SMS messages; ECU Modbus interface

  • Event-based history (up to 1000 records) with customer-selectable list of stored values

  • Integrated PLC programmable functions

  • Integrated fixed and configurable protections

  • DIN-Rail mount

  • Customized firmware solution

  • Version with extended communication features (NTC version) is available upon request

INTELIGEN NTC BaseBox 400Hz

Generator Controller

  • Comprehensive gen-set controller for land aircraft operating at 400 Hz frequency (GPU-Ground Power Units)

  • Island operation, based on standard MINT application

  • Synchronizing and power management functions

  • To be used in conjunction with detachable / external colour displays InteliVision 5, InteliVision 8, or InteliVision 18Touch

  • Support of engines with ECU (Electronic Control Unit)

  • Complete integrated gen-set solution and signal sharing via CAN bus – minimum external components needed

  • Many communication options – easy remote supervising and servicing

  • Gen-set performance log for easy problem tracing

  • Automatic synchronizing and power control (via speed governor or ECU)

  • AMF function, Baseload, Import / Export, Peak shaving, Voltage and PF control (AVR)

  • Generator measurement: U, I, Hz, kW, kVAr, kVA, PF, kWh, kVAhr

  • Mains measurement: U, I, Hz, kW, kVAr, PF

  • Selectable measurement ranges for AC voltages and currents – 120 / 277 V, 0–1 / 0–5 A

  • True RMS (TRMS) is used with Voltage, Current and Power measurement

  • Inputs and outputs configurable for various customer needs

  • Bipolar binary outputs - possibility to use BO as High or Low side switch

  • 1× RS232 / 2× RS485 interface with Modbus protocol support; Analog / GSM / ISDN / CDMA modem communication support; SMS messages; ECU Modbus interface; secondary RS485 converter is isolated

  • AirGate support

  • Ethernet connection (RJ45)

  • USB 2.0 slave interface

  • Controller redundancy

  • Event-based history (up to 1000 records) with customer-selectable list of stored values; RTC; statistic values

  • Integrated PLC programmable functions

  • Integrated fixed and configurable protections

  • DIN-Rail mount

  • Customized firmware solution 

INTELIMAINS NT BaseBox

Mains Controller

  • For multiple up to 31 gen-sets operating in parallel to mains (or isolated parallel)

  • To be used in conjunction with detachable / external colour displays InteliVision 5, InteliVision 8,  InteliVision 12Touch, or InteliVision 18Touch

  • Import/export power control of the gen-set group; many different power control modes available

  • Reverse synchronization of the loaded gen-set group to mains

  • Coupling of several synchronized mains to a common bus

  • Allows to build complex applications with more mains incomers, bus-tie breakers etc.

  • AMF function, Baseload, Import / Export, Peak shaving

  • Mains measurement: U, I, Hz, kW, kVAr, kVA, PF, kWh, kVAhr

  • Bus measurement: U, I, Hz, kW, kVAr, PF

  • Selectable measurement ranges for AC voltages and currents – 120 / 277 V, 0–1 / 0–5 A

  • True RMS (TRMS) is used with Voltage, Current and Power measurement

  • Inputs and outputs configurable for various customer needs

  • Bipolar binary outputs - possibility to use BO as High or Low side switch

  • Event-based history (up to 1000 records) with customer-selectable list of stored values

  • Integrated PLC programmable functions

  • Integrated fixed and configurable protections

  • DIN-Rail mount of the controller

  • Customized firmware solution

INTELIMAINS NTC BaseBox

Mains Controller

  • For multiple up to 31 gen-sets operating in parallel to mains (or isolated parallel)

  • To be used in conjunction with detachable / external colour displays InteliVision 5, InteliVision 8,  InteliVision 12Touch, or InteliVision 18Touch

  • Many different power control modes available

  • System Baseload with limited export or minimal import

  • Import/Export power control of gen-set group

  • Temperature of the system by power control

  • Dynamic changes of required system power via analog input

  • Reverse synchronization of the loaded gen-set group to mains

  • Forward synchronization of Mains to gen-set group

  • Coupling of several synchronized mains to a common bus

  • Allows to build complex applications with more mains incomers, bus-tie breakers, load management etc.

  • AMF function, Peak shaving

  • Mains measurement: U, I, Hz, kW, kVAr, kVA, PF, kWh, kVAhr

  • Bus measurement: U, Hz (kW, kVAr, PF - via CAN from gen-set group)

  • Selectable measurement ranges for AC voltages and currents – 120 / 277 V, 0–1 / 0–5 A

  • True RMS (TRMS) is used with Voltage, Current and Power measurement

  • Inputs and outputs configurable for various customer needs

  • 12 Binary Inputs

  • 12 Binary Outputs

  • 3 Analog Inputs

  • 1 Analog Output

  • Bipolar binary outputs - possibility to use BO as High or Low side switch

  • Many communication options – easy remote supervising and servicing

  • 1× RS232 / 1× RS485 interface with Modbus protocol support

  • Analog / GSM / ISDN / CDMA modem communication support

  • SMS messages

  • RS485 converter is isolated (one RS485 Display-dedicated port)

  • AirGate support

  • Ethernet connection (RJ45)

  • USB 2.0 slave interface

  • Controller redundancy

  • Event-based history (up to 1000 records) with customer-selectable list of stored values

  • RTC

  • Statistic values

  • Integrated PLC programmable functions

  • Integrated fixed and configurable protections

  • DIN-Rail mount of the controller

  • Customized firmware solution

© 2020 R.A Engineering - All copy rights reserved .

  • Facebook
  • Linkedin
This site was designed with the
.com
website builder. Create your website today.
Start Now